Page Comparison

...

1. Set the technical characterisitic of the various systems that you want to investigate. In the example of Figure 26 the first system is Generic and the second one is an OFDMA UL system. Do not forget to export the systems used to the library environment so that they can be reused  at a latter point of time. 
   
   
   

   Anchor
   F027 F027

   Figure 27: Setting various systems (import/export to library environment)
   
   
   

   Anchor
   F028 F028

   Figure 28: Overview of the various systems which can be simulated in SEAMCAT  (i.e. Generic and cellular)
   
   
2. Set the scenario (see section ‎10);
3. Set the path characteristics between the victim and the interferer (relative position, interferer’s density, path loss correlation and propagation model).  Links can also be added, duplicated, etc...;
4. The number of events to simulate can be set in the simulation control panel. It is also possible to choose  whether to run a simulation in the debug mode or not;
5. Having reviewed the scenario, the simulation can be run.

...