Versions Compared

Version Old Version 4 New Version 5
Changes made by

Former user

Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
3.2.2
3.2.2
In order for you to set up your a workspace, you need to first the first step is to set the system that you will be using used as victim. You need to : set the characteristics of your receiver the receiver  (that will be the victim link receiver (VLR)) and the transmitter (that will be the victim link transmitter (VLT)).

You can edit the system characteristics directly System characteristics can be directly edited in the system tab. This is illustrated in the figure below. 

Anchor
F065
F065
Figure 65 Access to the system environment

You can select For example, a generic system can be selected from the “import system from library button” as shown Figure shown Figure 67.

Anchor
F066
F066
Figure 66: Import system from library button

...

First, let set the frequency of the victim. You can change the frequency The frequency can be changed from 900 MHz (default value) to 1000 MHz as described in Figure 68. We consider In this example a constant value for this exampleis considered, but in principle , you can choose any type of distribution can be selected.

Anchor
F068
F068
Figure 68: Example of setting up the operating frequency

...