Page Comparison

Anchor
3.6 3.6

After the simulation of all events has been completed, SEAMCAT will have obtained calculated and stored the dRSS and iRSS vectors. You may then proceed Now it is possible to evaluate the probability of interference for the simulated scenario using the interference calculation control panel as shown in Figure 97.

...

Anchor
F097 F097

Figure 97: Interference calculation tabsheet

You can select any Any of the following parameters can be selected from the panel when you want to calculate calculating the probability of interference: 

• Calculation mode: compatibility or translation;
• Which type of interference signal is considered for calculation: unwanted, blocking, overloading, intermodulation or their a combination of them;
• Interference criterion: C/I, C/(N+I), (N+I)/N or I/N:

...