Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
3.6.3
3.6.3
You may choose the The protection criteria to be used in for the calculation of the probability of interference and the type of interference to be considered (unwanted and/or blocking) can be equally chosen (see Figure 97). 

Using the unwanted mode, it is possible to derive the C/I:

...

Since the resulting C/I is above the protection criteria (19 dB), the probability of interference calculated by SEAMCAT (Interference calculation) is equal to 0 (see Figure 100 (a)). 

The same conclusion is reached by using the C/(N+I) criteria. It should be noted that SEAMCAT performs a consistency check (ANNEX 19:) between the interference criteria (ANNEX 3:).

It is also possible to derive the (N+I)/N= -77.5-(-100)= 22.5 (since I>>N). Since the (I+N)/N which is obtained is above the protection criteria (3 dB), the probability of interference calculated by SEAMCAT (Interference calculation) is equal to 1 (see Figure 100(b)). 

The same conclusion is reached by using the I/N criteria.

...