Versions Compared

Old Version 4

changes.mady.by.user Former user

Saved on

compared with

New Version 5

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
5.2.2
5.2.2
This panel is a common interface that is reused in other radio system. It contains all information relative to the antenna other than the radiation pattern.

Anchor
T010
T010
Table 10: Receiver antenna pointing GUI

Description

Symbol

Type

Unit

Comments

Antenna height

h

D Distribution or SScalar

m

See ANNEX 11:

Azimuth ref. 0 deg is pointing to the Tx

-

BBoolean

-

when When selected, the antenna by default (i.e. for an antenna azimuth distribution of 0°) is pointing by default at the VLT. If not selected, it looks EAST.

Antenna azimuth: Antenna alignment horizontal tolerance

dH

D Distribution or SScalar

degree

This is the angle between the Rx main beam and the direction to Tx. E.g. if antenna azimuth=0, the Rx and Tx antennas are strictly aligned in the horizontal plane, see ANNEX 11:

Elevation ref. 0 is pointing to the Tx

-

BBoolean

-

when When selected, the antenna by default (i.e. for an antenna elevation distribution of 0°) is tilted by default towards the VLT. If not selected, it is set horizontal

Antenna elevation: Antenna alignment vertical tolerance

dV  

D Distribution or SScalar

degree

This is the vertical angle between the Rx main beam and the direction towards Tx. E.g. if antenna elevation=0, the Rx and Tx antennas are strictly aligned in the vertical plane, see ANNEX 11: on p. 312.