Page Comparison

Anchor
A17.1.3 A17.1.3

The most usually used SEAMCAT in-built propagation models in typical SEAMCAT scenarios are the Extended Hata model and the ITU-R Rec. P.1546 model. Therefore, when choosing between those two models, you should be aware of their similarities and differences:

...

The figure below shows an example of how the median propagation loss calculated with P.1546 model would change depending on the height of receive antenna (h2), and how it compares with the corresponding Hata model results (the curves are for 600 MHz, 50% time, 50% locations, default local clutter setting in P.1546). 

 

Anchor
F464 F464

Figure 464: Comparison between P1546 and Hata model.

...