...
The “receive power dynamic range” input parameter (denoted Pcmax in Table 12) is the maximum range of the receive power that a victim link receiver can accept, in terms of the maximum receive power over the VLR’s sensitivity threshold. This means that if the trialled dRSS value exceeds (sens+Pcmax), the dRSSmax is set to the “sensitivity” + “Receive power dynamic range”. Figure 437 (a) and (b) present an example on how to set the PC off and on respectively. Figure 438 (a) and (b) illustrates the effect of the power control in the victim link for PC off and on respectively.
| 
|
|---|---|
| (a) | (b) |
Figure 437: Setting up the received power dynamic range for the victim link (a) PC off (b) PC onAnchor F437 F437
|  |
|---|---|
| (a) | (b) |
Figure 438: illustration of the received power dynamic range effect on the victim linkAnchor F438 F438
...