...
Set the victim link receiver by selecting the receiver tab.
Figure 69: Selecting the receiver tabAnchor F069 F069
...
- The noise floor is –110 dBm. (#1 of Figure 70);
- The reception bandwidth is 200 kHz; (#2 of Figure 70);
- To simulate an omni-directional antenna, leave blank the horizontal pattern or select the omni directional antenna from the library (#3). The antenna peak gain is to be set to a value of 9 dBi; (#4) (see Figure 71);
- The antenna height is 30 m; (#5 of Figure 72);
- The interference criteria of the victim link receiver are a C/I of 19 dB, a C/(N+I) of 16 dB, a (N+I)/N criteria of 3 dB and a I/N of 0 dB; (#6 of Figure 73).
Figure 70: Setting the reception characteristicAnchor F070 F070
Figure 71: Setting the antenna pattern from the library and setting the peak gain to 9 dBiAnchor F071 F071
Figure 72: Setting the antenna heightAnchor F072 F072
Figure 73: Setting the interference criteriaAnchor F073 F073