Versions Compared

Version Old Version 5 New Version Current
Changes made by

Former user

Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
10.2.1
10.2.1
This option allows SEAMCAT to generate multiple interferers which may have the same or different technical characteristics from each other.  The following menu buttons are available in the interfering system links control panel.



 

Image Modified

Add an interfering systems link to the scenario

 

Generate multiple interfering links

 

Duplicate an interefering link

 

Change the selcted system type

 

Delete a link

 

On-line manual help

Anchor
F210
F210
Figure 210: Interfering system links control


Image Removed Image Added

Anchor
F211
F211
Figure 211: Generation of multiple interferer links with different
technical characteristics from each other

...

The feature “to position with” allows the deployment of a second type of interferer (for instance interfering link 1) for which the transmitters will be located at the same location as the transmitters of another type of interferers (i.e. interfering link 2 or interfering link 3). This feature is of interest since it allows deploying these two interferers at the same location (i.e. with the same coordinates) and these two transmitters could be transmitting at the same time while having different transmitter characteristics (e.g. emission mask, antenna radiation pattern…) or with a relative X, Y position set by DeltaX and DeltaY. 

Image Removed Image Added

Anchor
F212
F212
Figure 212: Possibility to position interferer links with one another

...