...
The reference cell in Figure 180 is used to calculate the effects of interference and to measure results and all non reference cells are used to provide a proper interference background to the reference cell. You can click on the cell that should be used as reference cell when gathering results. The red cell is the current selection.
Figure 180: System layout - reference cell selectionAnchor F183F180F183 F180
Table 23: System layout GUIAnchor T022T023T022 T023
...
Normally the considered cellular system (CDMA or OFDMA) is modelled as endless network using the so called wrap-around technique. Alternatively, you may specify that the modelled cellular cell is laying at the edge of the network, in this case the cellular system will be modelled as if extending to one side only. The latter case may be suitable for simulation of geographically separated victim and interfering systems, like in cross-border scenarios as illustrated in Figure 181.
...
Figure 181: Example on how to set up the system layout to reproduce a border coordination scenarioAnchor F184F181F184 F181