...
Figure 133 presents how to set-up SEAMCAT (See also A13.2 for further details).
Figure 133: Setting up the protection distance related to the simulation radius with 1 active interfererAnchor F133 F133
The simulation radius (see Figure 135) may then be calculated by using the following formula:
Figure 134: Calculated simulated radiusAnchor F134 F134
Figure 135: Calculation of the simulation radius and the iRSSunwanted using the protection distance (for 1 active interferer)Anchor F135 F135
...
These results are in line with those depicted on Figure 135. We can then increase the number of active transmitters to 10 as shown in Figure 136.
Anchor F136
...
Figure 136: Setting up the protection distance related to the simulation radius with 10 active interfererF136
The simulation radius may then be calculated by using the following formula (see Figure 137 for the result):
= 0.75 km
Figure 137: Calculation of the Rsimu and the iRSSunwanted using the protection distance Anchor F137 F137
(for 10 active interferer)
...