| Anchor | ||||
|---|---|---|---|---|
|
...
The basic input parameters such as: Antennas antennas height, frequency, and terrain irregularity determines determine the computing method. Algorithm The algorithm can be divided into three areas (determined by a function of the distance): A) Line-of-sight range (understood as uninterrupted visibility of the bulge of the Earth Plane, but which may be obscured obstructed by obstacles on the route), B) Diffraction range, C) Scatter range. In the first range to loss computing used the path loss is computed using Geometric-optics rays theory. In the second range used Fresnel-Kirchoff knife-edge diffraction theory is used. In the third range used , the Forward scatter theory is applied.
The Longley-Rice (Area prediction mode) propagation model was originally implemented for SEAMCAT in the National Telecommunications Institute (Poland) in co-operation with the Wrocław University of Technology. The task was performed under Research Project of the Polish Ministry of Science and Higher Education entitled: Next generation teleinformatics services - technology, application and market aspects (no. PBZ-MNiSW-02/II/2007).[A1]
...
[A1]I would delete these two paragraphs. In the paragraph that follows below the same piece of information is being repeated.
The SEAMCAT implementation of the Longley-Rice (Irregular Terrain Model) assumes a propagation model in area prediction mode (i.e. no need for terrain profile details to make a path loss calculation).The ITM model returns predicted median attenuation of a radio signal, regarding not only statistical terrain, system, climate parameters but also variability of the signal in time and in space, assuming a given level of confidence. Longley-Rice computes path loss into three regions:
...
At the beginning necessary geometry parameters are calculated, based on input parameters. Then, depending on the range in which the transceiver and receiver are, ITM model computes a reference attenuation Aref – the median attenuation relative to a free space. The reference attenuation is a function of distance d, what is illustrated below. The cumulative attenuation comprises reference attenuation and attenuation of quantiles A(qT, qL, qs) – which are calculated based on normal distribution, as variability of time, localization and reliability.
'
Figure 475482: Reference attenuation as function of distanceAnchor F475F482F475 F482
...