You can enter the frequency. The frequency value is overwritten at the “Scenario” tab level.
Table 8: Generic system – General panel
Description | Symbol | Type | Unit | Comments |
Frequency | f | D or S | MHz | Distribution of the centre frequency of the system |
You have access to 3 sub tabs to set the generic system:
- Receiver: This will be used either as VLR or ILR;
- Transmitter: This will beused either as VLT or ILT;
- Transmitter to Receiver Path (i.e. either VLT ->VLR or ILT ->ILR).