...
In this case SEAMCAT calculates the receiver attenuation, Attenuation (Df), to be applied to the interfering signal by using the following expression:
Unit body Attenuation(
...
f) =
...
blockMax Interf Signal (
...
f) (dBm) -
...
sensVLR (dBm) + C/(N+I) (dB) – I/N (dB)
...
(Eq. 23)
where:
- Df = (fILT - fVLR) is the frequency separation;
- sensVLR is the sensitivity of the VLR (dBm) as defined in the simulation scenario.
...