...
The corresponding power may derived using the known equation:
Unit body P(dBm/Bref)=Pe (dBm)+Att(dBc/Bref)
...
(Eq. 20)
Then, in this example, outside the emission bandwidth (offset between –0.1 MHz and -1 MHz and between 0.1 MHz and 1 MHz), the power is equal to:
| Unit | ||
|---|---|---|
|
The complete unwanted emission mask is provided in the below figure.
...
Using the previous assumptions, it is possible to derive the interfering power received by the Victim link receiver within its bandwidth as described in ANNEX 5: on page 274. This is called the iRSSunwanted:
...
(Eq. 21)
Unit body iRSSunwanted = P + Ge + Gr - L
...
| Unit | ||
|---|---|---|
|
...
| Unit | ||
|---|---|---|
|
...
|
...
This can be checked by running a simulation and displaying the iRSSunwanted signal as depicted in Figure 100.
Figure 100: Mean iRSSunwantedAnchor F104 F104
...