...
The complete unwanted emission mask is provided in Figure 101.
Figure 10399: Unwanted emission maskAnchor F103 F103
...
Using the previous assumptions, it is possible to derive the interfering power received by the Victim link receiver within its bandwidth as described in ANNEX 5: on page 274. This is called the iRSSunwanted:
...
This can be checked by running a simulation and displaying the iRSSunwanted signal as depicted in Figure 104100.
Figure 104100: Mean iRSSunwantedAnchor F104 F104
In this example there is no bandwidth correction factor to be applied to the calculation of the iRSSunwanted since the VLR bandwidth and the ILT reference bandwidth have the same value (i.e. 200 KHz).
Examples of correction bandwidth can be found in section 3.3.8