Page Comparison

Anchor
6.5.2 6.5.2

In such a scenario, the detection threshold is taken to a lower value compared to the sRSS and none of the WSDs are transmitting. In SEAMCAT, the Tx power is set to -1000 dBm (Figure 170166). The WSD frequency is the same as the victim frequency per event. 

Anchor
F170 F170

Figure 170166: all the WSDs are off i.e. -1000 dBm

...

Note that in this specific case, the average e.i.r.p. and average WSDs per frequency can not be calculated and therefore can not be displayed as shown in Figure 172168.

Anchor
F171 F171

Figure 171167: All the WSDs are off i.e. -1000 dBm