Versions Compared

Old Version 5

changes.mady.by.user Former user

Saved on

compared with

New Version 6

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
5.4.3
5.4.3
The percentage of transceivers being indoor and outdoor can be selected thanks to this panel.. It will work in combination with the chosen propagation model that you will select. By default the transmitter and receiver are located outdoor. For each elements of the link, it is possible to add  Image Added or remove  Image Added a probablity of indoor.

Anchor
F158
F158
Figure 158154: Example of setting up the outdoor/indoor ratio

...


You can edit the field by double cliking

Anchor
F159
F159
Figure 159155: Graphical interface to edit the probability, wall loss and associated standard deviation

 


Anchor
T019
T019
Table 19: Local environment and wall loss


 

Description

Symbol

Type

Unit

Comments

Local environment: Receiver

Indoor/

outdoor

-

-

Environment of the receiver antenna: outdoor, indoor

It is used for both VLR and ILR

Local environment: Transmitter

Indoor/

outdoor

-

-

Environment of the transmitter antenna: outdoor, indoor

It is used for both VLT and ILT

Probability

-

Scalar

%

Probability that a Tx or Rx is located indoors or outdoors

Wall loss

or

Scalar

dB

Attenuation of external walls separating indoor and outdoor propagation environments. This parameter is  associated to the selected propagation model 

Std. dev.

or

Scalar

dB

Wall loss stdandard deviation (indoor - outdoor)
Wall loss standard deviation associated to the selected propagation model

 



Note that when opening a workspace created prior to SEAMCAT version 5, all settings are mapped to the current SEAMCAT version running on your machine. As the parameter local environment didn’t exist before version 5, a warning may appear indicating that “local environments are skipped for multiple interfering links”. This means that SEAMCAT was not able to automatically set the parameters of the local environments (most likely due to a scenario with multiple interferers). Therefore, there is a need to edit the local environment manually.

Anchor
F160
F160
Figure 160156: Migration warning on the local environment

...