Content Comparison

Anchor
4.5 4.5

In this section the Free Space Model is used to derive the attenuation on the different paths and the Victim Link and Interfering Link operate at the same frequency – 1000 MHz – co-channel interference. Figure 115 presents an illustration of the various radii (i.e. coverage radius and simulation radius) that are used in SEAMCAT and with reference to the various pairs of transmitters and receivers used for a simulation.

Anchor
F115 F115

Figure 115111: Illustration of the Coverage Radius and the Simulation Radius with respect to the pairs of transmitters and receivers of the victim and interfering links

 

The distance between the VLT and the VLR is referred to as the coverage radius ( ) (see ANNEX 13:). In the case of mobile applications, the number of terminals that may transmit in a given cell of the network is given by:

...

The cluster characterises the frequency re-use of a mobile network (see Figure 116112).

Anchor
F116 F116

Figure 116112: Frequency cluster

The victim link coverage radius (i.e. centred on the victim link transmitter) may then be calculated by using the formula below. Figure 117´presents 113´presents how to set-up SEAMCAT.

...

(Eq. 26)

 

 

 

 

Anchor
F117 F117

Figure 117113: Calculation of the victim link coverage radius

...

                                           dRSS = 30 (dBm) + 9 + 9 - (32.5 + 10 log(1.43^2) + 20 log(1000)) = -47.5 dBm

Anchor
F118 F118

Figure 118114: Resulting dRSS distribution 

Anchor
F119 F119

Figure 119115: Calculation results of the victim link coverage radius 

Anchor
F120 F120

Figure 120116: Illustration of the VLR and VLT positioning based on the traffic limited network coverage radius (ILT-red, ILR-green, VLR-yellow, VLT-blue)

...