Versions Compared

Old Version 2

changes.mady.by.user Former user

Saved on

compared with

New Version 3

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
A12.2
A12.2
The path distance factor will be multiplied by the coverage radius Image Removed  (or Image Removed) to obtain the coverage area.

Therefore, the trailed distance between Tx and Rx will be Image Removed *Path factor.

For instance, if you set the victim path distance factor as a uniform distribution 0…1, then the distance will be between 0 and Image RemovedWhen an uncorrelated[1] mode is selected, the distance between 2 elements is determined by distance and azimuth parameters, in addition to Delta X and Delta Y:

                                       (Eq. 170)

                                         (Eq. 171)

where:  is the trialled path distance factor
            is the coverage radius in system links, or the simulaton radius in the interference path
             is the trialled path azimuth


...

[1] Within a system link, uncorrelated means the “Correlated distance” tickbox is not selected. For the interfering link to victim link path, the “None”, “Uniform” and Closest” are uncorrelated.