Versions Compared

Version Old Version 3 New Version 4
Changes made by

Former user

Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
A7.7.1
A7.7.1
As an example of a BS spectrum emission masks (i.e. CDMA DL as interferer), TS 25.104 ‎[1] have shown that different values may need to be considered depending on the BS maximum output power Table 64 presents Spectrum emission mask values, BS maximum output power P ³ 43 dBm.

Anchor
T064T065T064
T065
Table 6465: Spectrum emission mask values, BS maximum output power P ³ 43 dBm (from ‎[1])

...


Frequency offset of measurement filter ‑3dB point, Df

Frequency offset of measurement filter centre frequency, f_offset

Minimum requirement Band I, II, III, IV, V, VII, VIII, X

Additional requirements Band II, IV, V, X

Measurement bandwidth

2.5 MHz <= Df < 2.7 MHz

2.515MHz <= f_offset < 2.715MHz

-14 dBm

-15 dBm

30 kHz

2.7 MHz <= Df < 3.5 MHz

2.715MHz <= f_offset < 3.515MHz

 Image Modified

-15 dBm

30 kHz

(see note 3)

3.515MHz <= f_offset < 4.0MHz

-26 dBm

NA

30 kHz

3.5 MHz <= Df <= Dfmax

4.0MHz <= f_offset < f_offsetmax

-13 dBm

-13 dBm 4

1 MHz

 

 



Assuming a BS Tx power of 43 dBm, the equation of Table 65 gives the SEAMCAT input as presented in XXX and as illustrated in Figure 380382.

Note that for this example, we add the limit from Recommendation ITU-R SM.329 for frequency offset above 12.5 MHz ‎[2].

Anchor
T065T066T065
T066
Table 6566: Example of derivation of 3GPP spectrum emission mask into a SEAMCAT input format (with addition of the ITU-R Rec. SM.329 limit)


 

Frequency offset of measurement filter ‑3dB point, Df

Minimum requirement Band VIII

SEAMCAT (in ref/measurement bandwidth)

Measurement bandwidth

2.5 MHz <= Df < 2.7 MHz

-14 dBm

43 – (-14) = 57

30 kHz

2.7 MHz <= Df < 3.5 MHz

 Image Modified

Linear

30 kHz

(see note 3)

-26 dBm

43 – (-26) = 69

30 kHz

3.5 MHz £ Df <= Dfmax

-13 dBm

43 – (-13) = 56

1 MHz

Above 12.5 MHz

(ITU-R SM.329)

-36 dBm

43 – (-36) = 79

100 kHz


 

...

 

Anchor
F380F382F380
F382
Figure 380382: Illustration of the spectrum emission mask at the BS used in SEAMCAT and its derivation from the 3GPP specification and ITU-R SM.329 (for frequency offset larger than 12.5 MHz within the spurious emission domain in the frequency range 30 to 1000 MHz).

 

...