Versions Compared

Old Version 1

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
A14.2
A14.2
The received power dynamic range in the victim link is a simplified power control mechanism which ensures only that a certain dRSS is not exceeded in the victim link receiver. 


The “receive power dynamic range” input parameter (denoted Pcmax in Table 12) is the maximum range of the receive power that a victim link receiver can accept, in terms of the maximum receive power over the VLR’s sensitivity threshold. This means that if the trialled dRSS value exceeds (sens+Pcmax), the dRSSmax is set to the “sensitivity” + “Receive power dynamic range”. Figure 432 437 (a) and (b) present an example on how to set the PC off and on respectively. Figure 433 438 (a) and (b) illustrates the effect of the power control in the victim link for PC off and on respectively.

Image Added Image Removed

Image Removed

Image Added

Image Removed

Image Added

(a)(b)

Anchor
F437
F437
Figure 432437: Setting up the received power dynamic range for the victim link (a) PC off (b) PC on


Image Modified

Image Modified
(a)(b)

Anchor
F438
F438
Figure 433438: illustration of the received power dynamic range effect on the victim link

(a)   PC off (b) PC on with a limit of -98 dBm = -103 dBm (sens) + 5 dB (Pcmax)

...