Page Comparison

Anchor

	A18.7
	A18.7

The basics of the structure of an EPP and its components are shown on Section 8.6, therefore these details are not repeated on this section.

The example wants to show

how to collect simulated data
how to generate own results based on the collected data
how to provide additional information using a custom UI assigned to the EPP (see Section A.19.3.1)
how to apply user defined buttons onto the custom UI which might be used also for a 'user defined consistency check' of the custom UI (see Section A.19.3.2)

The following capabilities are implemented onto the example:

collect data required for the calculation of the distribution of C/(N+I) for each interference link separately
generate a vector group containing the distribution vectors
do a user defined consistency check on the custom UI
let the custom UI calculate the probability of exceeding a given limit for the C/(N+I) criterion and let the UI show the result on its panel

...

On the main part of collecting data the following is done:

...

in case the consistency warning regarding the not supported cellular systems has been ignored, the EPP stops and puts onto the result panel the appropriate message;
this could be understood as "Runtime exception"
takes the required values of the victim
collects the interference power of each active interfering transmitter;
it has to be pointed out that for a real plugin the bandwidth of the victim receiver alone wouldn't be sufficient to determine whether co-channel is to consider or not
puts the calculated distribution of C/(N+I) for each interference link as vector group onto the result panel

Figure 509

Anchor

	F517
	F517

Figure 517: EPP example source code (without other implemented methods)

Image Added

Anchor

F518
Image Removed F518
Figure 510518: EPP example source code (consistency check)

Image RemovedImage Added

Anchor

	F519
	F519

Figure 511519: EPP example source code (selecting the map entry)

...

Versions Compared