Versions Compared

Old Version 1

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
12.4
12.4
When the cognitive radio mode is activated, SEAMCAT resturns the output vector shown in Figure 251 and described in Table 52.

 Image Added

Anchor
F251
F251
Figure 251: Output vector for the CR


Anchor
T052
T052
Table 52: Output results for CR simulation


#

Item

Description

1

sRSS

sRSS value calculated at the selected WSD frequency (i.e. where the WSD is allowed to transmit) for each of the event

2

WSD frequency

The actual selected frequency at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm

3

WSD e.i.r.p.

The actual selected e.i.r.p. at which the WSDs are allowed to transmit as the result of the spectrum sensing algorithm

4

Victim frequency

frequency at which the victim device transmits per event

5

Average e.i.r.p. per event x active WSDs (for each frequency)

average e.i.r.p. per event for all the active WSDs transmitting at a certain frequency

6

Average Active WSD per event (for each frequency)




At the end of the simulation, SEAMCAT provides a set of output vectors as above. Then you can perform the interference probability calculation as previously described.