Page Comparison

A.17.20.1 Description of the model

...

Note 1:
Breakpoint distance dBP'=4hBS'hMS'fc/c, where

Mathinline
body --uriencoded--%7B\ d%7D_%7BBP%7D%5e\prime=4h_%7BBS%7D%5e\prime h_%7BMS%7D%5e\prime f_c/c,

 where fc is the centre frequency in Hz, c=3×108 m/s is the propagation velocity in free space, and hBS' and hMS' are the effective antenna heights at the BS and the MS, respectively. The effective antenna heights hBS' and hMS' are computed as follows: hBS'=hBS-hE, hMS'=hMS-hE, where hBS and hMS are the actual antenna heights, and hE is the effective environment height assumed to be hE=1 m.

Note 2:
Break point distance dBP=2πhBShMSfc

Mathinline
body --uriencoded--d_%7BBP%7D=2\pi h_%7BBS%7Dh_%7BMS%7Df_c/c,

where  where fc is the centre frequency in Hz, c=3×108 m/s is the propagation velocity in free space, and hBS and hMS are the antenna heights at the BS and the MS, respectively.

...

SEAMCAT specific implementation:hBS=maxhTx, hRx
hMS=minhTx, hRx

Mathinline
body --uriencoded--h_%7BBS%7D=\max%7B\left(h_%7BTx%7D,\ h_%7BRx%7D\right)%7D

Mathinline
body --uriencoded--h_%7BMS%7D=\min%7B\left(h_%7BTx%7D,\ h_%7BRx%7D\right)%7D

Table 2: LOS Probability

...

The input parameters for the path loss model ITU-R M.2135-1 are shown in Figure 1 and defined in Table 3.
Image RemovedImage Added
Figure 1: GUI of the ITU-R M.2135-1 path loss model

Table 3: Parameters of the ITU-R M.2135-1 path loss model

...