Versions Compared

Old Version 2

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
9.8
9.8
The C/I calculation in UL is calculated so that C(j,k) is the received power from the UEj,k at the j-th BS.

...

                                  

Unit
body$C(j,k)={{P}_{t}}(j,k)\times effective\_pathloss(U{{E}_{j,k}},B{{S}_{j}})$
 (Eq. 54)

where Pt is the transmit power of the UE in dBm (see UL Power control below) and effective_pathloss is defined as in Section ‎7.6.1.. 


The total interference to a UL cellular system is derived from

 

...


                                                 

Mathinline
bodyI(j,k)={{I}_{i\text{nter}}}(j,k)+{{I}_{ext}}(j,k)+N
 (Eq. 55)

where

  • Iinter is the interference coming from UEs of the same system but from adjacent cells, i.e. the inter-system interference from other cells. Since a fully orthogonal system is assumed, only UEs  which transmit in the same frequency subcarriers will introduce interference to each other, hence only UEs in other cells with the same k index are considered;
  • Iext(j,k) is the interference from external interfering system(s) in adjacent channel;
  • N is the noise floor.

                                                  Image Removed                                                 

Unit
body${{I}_{\text{inter}}}(j,k)=\sum\limits_{l=1,l\ne j}^{{{N}_{cell}}}{{{P}_{t}}(l,k)\times pathloss(U{{E}_{l,k}},B{{S}_{j}})}$
 (Eq. 56)

               Image Removed         

Unit
body${{I}_{\text{ext}}}(j)=\sum\limits_{m=1}^{N}{iRS{{S}_{unwanted}}(IL{{T}_{m}},B{{S}_{j}})+ iRS{{S}_{blocking}}}(IL{{T}_{m}},B{{S}_{j}})$
 (Eq. 57)

Iext(j,k) is the interference to the the victim BSj from N interfering link transmitters (ILT), where


Image Removed       

Unit
body

 

$iRS{{S}_{unwanted}}(IL{{T}_{m}},B{{S}_{j}})=iRS{{S}_{unwanted}}(\text{over the size of the UE resource blocks})$
 (Eq. 58)

...


for each of the victim BSj’s frequency where the UL information is received. The ILT can be any generic systems or a BS/UEs of a cellular system.

...

         

Unit
body$iRS{{S}_{blocking}}(IL{{T}_{m}},B{{S}_{j}})=iRS{{S}_{blocking}}(\text{over system bandwidth})\times \frac{{{\text{N}}_{\text{RB}}}}{\text{M}}$
  (Eq. 59)

at the victim system frequency. Where NRB is the number of RBs (i.e. subcarriers) requested per UE, and M is the maximum number of RBs per BS.



             Image Removed Image Added                                (Eq. 60)

where NoiseFigureBS is the noise figure of a BS.