| Anchor | ||||
|---|---|---|---|---|
|
...
Figure 76: Selecting the Tx to Rx path tabAnchor F076 F076
SEAMCAT allows you to locate defining the locations of the Victim link receiver and the Victim link transmitter in a fixed manner (correlated) or following some distribution (uncorrelated) as summarised in Figure 77. The input parameters are detailed in section 5.4, and the algorithms are detailed in ANNEX 13:
Figure 77: Summary of the VLT ↔ VLR location capability in SEAMCATAnchor F077 F077
In this exercise, you can set the distance between the VLT and the VLR as fixed (correlated distance) (x = y = 2 km) as illustrated in Figure 78.
...
Anchor F078
...
Figure 78: Distance between the Victim link transmitter and the Victim link receiver (Victim Link)F078
It is assumed that the Tx and Rx are both outdoor as shown in Figure 79.
Figure 79: Example of setting up the outdoor/indoor ratioAnchor F079 F079
For this, you need to select the correlated distance option of SEAMCAT as shown in Figure 80. In SEAMCAT, the origin of the coverage radius (see ANNEX 13:) is the transmitter (this is also reminded in the GUI) of the link.
Anchor F080
...
Figure 80: Illustration of the correlated distance in SEAMCATF080
...