Versions Compared

Old Version 4

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
4.8
4.8
If a minimum protection distance  between the victim link receiver and interefering interfering link transmitter is introduced then the simulation radius may then be calculated by using the following formula:

                                                                                

...

Mathinline
body{{R}_{simu}}=\sqrt{\frac{{{n}^{active}}}{\pi \ \times dens_{it}^{active}pro{{b}_{transmission}}}+d_{0}^{2}}
    (Eq. 30)

Note: The calculation of the iRSS at each trial will be performed only if the location of the ILT satisfies the following condition Image Removed

Unit
body${{d}_{it\to vr}}\ge {{d}_{0}}$
.

Figure 133 129 presents how to set-up SEAMCAT (See also A13.2 for further details).

Image Removed Image Added

Anchor
F133F129F133
F129
Figure 133129: Setting up the protection distance related to the simulation radius with 1 active interferer

The simulation radius (see Figure 135131) may then be calculated by using the following formula:

Image Removed

Image Removed

Mathinline
body{{R}_{simu}}=\sqrt{\frac{1}{\pi \ \ \times 10}+{{(0.5)}^{2}}}$.= 0.531 km


 Image Added

Anchor
F134F130F134
F130
Figure 134130: Calculated simulated radius


Image Removed Image Added

Anchor
F135F131F135
F131
Figure 135131: Calculation of the simulation radius and the iRSSunwanted using the protection distance (for 1 active interferer)

 


If the distance between the VLR and the ILT is equal to the protection distance (0.5 km), then:

                       

...

Mathinline
bodyiRSSunwanted = 33 (dBm) + 11 + 9 - (32.5 + 10 log(0.5 x 0.5) + 20 log(1000)) = -33.

...

5dBm
    

 

If the distance between the VLR and the ILT is equal to the simulation radius (0.531 km), then:

...

                        

Mathinline
bodyiRSSunwanted = 33 (dBm) + 11 + 9 - (32.5 + 10 log(0.531 x 0.531) + 20 log(1000)) = -34 dBm

...


These results are in line with those depicted on Figure 135131. We can then increase the number of active transmitters to 10 as shown in Figure 136132.


 

...

 Image Added

Anchor
F136F132F136
F132
Figure 136132: Setting up the protection distance related to the simulation radius with 10 active interferer

The simulation radius may then be calculated by using the following formula (see Figure 137 133 for the result):

 

Mathinline
body{{R}_{simu}}=\sqrt{\frac{10}{\pi \ \ \times 10}+.5\times 0.5}$ = 0.75

...

km

             

Image Removed Image Added

Anchor
F137F133F137
F133
Figure 137133: Calculation of the Rsimu and the iRSSunwanted using the protection distance
(for 10 active interferer)

If the distance between the VLR and a single ILT is equal to the protection distance, then:

...

                       

Mathinline
body iRSSunwanted = 33 (dBm) + 11 + 9 - (32.5 + 10 log(0.5 x 0.5) + 20 log(1000)) = -33.5 dBm

If the distance between the VLR and a single ILT is equal to the simulation radius, then:

...

Mathinline
bodyiRSSunwanted = 33 (dBm) + 11 + 9 - (32.5 + 10 log(0.75 x 0.75) + 20 log(1000)) = -37 dBm

If 10 transmitters are deployed around the VLR then:

...

Mathinline
bodyiRSSunwanted = -37 (dBm) + 10 log(10) = -27 dBm

...

 and 
Mathinline
bodyiRSSunwanted = -33.5 (dBm) + 10 log(10) = -23.5 dBm

                       

Mathinline
body-27 dBm <

...

iRSSunwanted < -23.5 dBm
 (see Figure

...

133)