| Anchor | ||||
|---|---|---|---|---|
|
Figure 76: Selecting the Tx to Rx path tabAnchor F076 F076
...
SEAMCAT allows defining the locations of the Victim link receiver and the Victim link transmitter in a fixed manner (correlated) or following some distribution (uncorrelated) as summarised in Figure 77. The input parameters are detailed in section 5.4, and the algorithms are detailed in ANNEX 13:
...
In this exercise, set the distance between the VLT and the VLR as fixed (correlated distance) (x = y = 2 km) as illustrated in Figure 78.
Figure 78: Distance between the Victim link transmitter and the Victim link receiver (Victim Link)Anchor F078 F078
It is assumed that the Tx and Rx are both outdoor as shown in Figure 79.
Figure 79: Example of setting up the outdoor/indoor ratioAnchor F079 F079
For this, select the correlated distance option of SEAMCAT as shown in Figure 80. In SEAMCAT, the origin of the coverage radius (see ANNEX 13:) is the transmitter (this is also reminded in the GUI) of the link.
Figure 80: Illustration of the correlated distance in SEAMCATAnchor F080 F080
...