After the simulation of events has been completed, SEAMCAT will have obtained and stored the dRSS and iRSS vectors. You may then proceed to evaluate the probability of interference for the simulated scenario using the interference calculation control panel as shown in Figure 97.
Figure 97: Interference calculation tabsheet
You can select any of the following parameters from the panel when you want to calculate the probability of interference:
- Calculation mode: compatibility or translation;
- Which type of interference signal is considered for calculation: unwanted, blocking, intermodulation or their combination;
- Interference criterion: C/I, C/(N+I), (N+I)/N or I/N: