After the simulation of all events has completed, SEAMCAT will have calculated and stored the dRSS and iRSS vectors. Now it is possible to evaluate the probability of interference for the simulated scenario using the interference calculation control panel as shown in Figure 97.
Figure 97: Interference calculation tabsheet
Any of the following parameters can be selected from the panel when calculating the probability of interference:
- Calculation mode: compatibility or translation;
- Which type of interference signal is considered for calculation: unwanted, blocking, overloading, intermodulation or a combination of them;
- Interference criterion: C/I, C/(N+I), (N+I)/N or I/N: