You can perform a sanity check on the unwanted emission calculation by using the <Test Rel. Unwanted> emission function in the menu bar of SEAMCAT, by clicking on the icon of the toolbar (
) or by pressing <CTRL+SHIFT+U>. You may check the definition of unwanted emissions mask by calculating the actual unwanted emissions for given mask in a given VLR bandwidth applying a certain ILT-VLR frequency offset:
Figure 57: Access to testing unwanted emission function
This feature allows you to directly extract the uwanted emission by entering the frequency separation, the receiver bandwidth and the spectrum mask as shown in Figure 58.
Figure 58: Illustration of the unwanted emission function check routine