/
A13.2 SIMULATION RADIUS
A13.2 SIMULATION RADIUS
- Former user (Deleted)
Owned by Former user (Deleted)
The parameter simulation radius Rsimu is used to describe the radius of the area where the interfering link transmitters are distributed around the victim link receiver. It is used in the different positioning modes as described in the following sections.
Figure 436: Representation of the Simulation radius
Related content
4.6 Simulation radius (ILT-VLR)
4.6 Simulation radius (ILT-VLR)
More like this
4.7.1 Uniform density mode - simulation radius calculation
4.7.1 Uniform density mode - simulation radius calculation
More like this
4.8 Protection distance
4.8 Protection distance
More like this
A13.2.2 Uniform density mode
A13.2.2 Uniform density mode
More like this
10.3.1 Relative positioning of interfering link (Generic system)
10.3.1 Relative positioning of interfering link (Generic system)
More like this
A13.2.1 None
A13.2.1 None
More like this