/
3.2.6 Selecting the propagation model
3.2.6 Selecting the propagation model
- Former user (Deleted)
Owned by Former user (Deleted)
Since both the transmitter and the receiver characteristics and the location between the two have been defined, the propagation model needed for the simulation can be now selected.
To simplify this task, let us assume that the free space model is used to calculate the attenuation between the Victim link receiver (VLR) and the Victim link transmitter (VLT).
In addition, the Variation should be disabled as shown in Figure 81.
Figure 81: Example of setting up the free space propagation model for Step 1
, multiple selections available,
Related content
A17.7.1.2 Input parameters
A17.7.1.2 Input parameters
More like this
3.2.5 Positioning the VLT vs VLR
3.2.5 Positioning the VLT vs VLR
More like this
4.5 Coverage radius (VLR-VLT)
4.5 Coverage radius (VLR-VLT)
More like this
3.2.3 Receiver
3.2.3 Receiver
More like this
3.2.1 Victim link
3.2.1 Victim link
More like this
3.3.7 Calculating the iRSS by hand
3.3.7 Calculating the iRSS by hand
More like this