...
Description | Symbol | Type | Unit | Comments |
Interferer is CR |
| switch |
| When the CR button is checked then it allows to set the emission characteristics of the VLT (used for the sRSS calculation only) |
Emission mask: Unwanted signal level (VLT)
|
| FFunction (X,Y) (MHz) | dBm/reference bandw. (MHz) | Define the mask of the transmitter, in the emission bandwidth and out of the emission bandwidth. Negative values in the relative mask should be chosen in a way that the integration over the emission bandwidth results in the total emitted power. If constant mask, there is no emission outside of the bandwidth. |
Unwanted emissions floor: Noise floor signal level |
| FFunction (X,Y) (MHz) | dBm/ reference bandw. (MHz) | Define the minimum strength of the unwanted emissions. So the unwanted emissions equal to Max(Pwt + Unwanted emission, Unwanted emissions floor) |
Note that the settings of the emissions mask and the emission floor is the same as for the interfering link (i.e. same units).
...