Page Comparison

Anchor
6.3 6.3

For the sensing feature to be activated, both the victim and interferer transmitters have to have the “interferer is CR” selected (Figure 162). This will activate the spectrum sensing algorithm (see ANNEX 16:) and will allow you to set the transmitting characteristic of the victim link transmitter, i.e. the energy that the cognitive radio spectrum sensing device is to sense. You will be able to set the emission mask and the emission floor. 

Anchor
F162 F162

Figure 162: Selection of the CR algorithm

 

Anchor
T020 T020

Table 20: Victim Link transmitter

...

 Note that the settings of the emissions mask and the emission floor is the same as for the interfering link (i.e. same units).

 

Anchor
F163 F163

Figure 163: Activate the CR in the VLT (Victim Link) to consider its emission characteristics
(i.e. used in the sRSS calculation) 

...