A8.2.1 Case 1: No overlapAnchor A8.2 A8.2
Figure 384: iRSS_blocking case 1: no overlapAnchor F384 F384
...
A8.2.2 Case 2: Partial overlap with fILT > fVLR
Figure 385: iRSS_blocking case 2: partial overlap with fILT > fVLRAnchor F385 F385
...
A8.2.3 Case 3: Partial overlap with fILT < fVLR
Figure 386: iRSS_blocking case 3: partial overlap with fILT < fVLRAnchor F386 F386
...
A8.2.4 Case 4: Total overlap with BWVLR < BWILT
Figure 387: iRSS_blocking case 4: Total overlap with BWVLR < BWILTAnchor F387 F387
Note: the blue coloured range is covered by the iRSS_unwanted calculation and therefore not taken into account in the iRSS_blocking calculation.
...
A8.2.5 Case 5: total overlap with BWVLR > BWILT
Figure 388: iRSS_blocking case 5: total overlap with BWVLR > BWILTAnchor F388 F388
...
If the mask is entered as positive values then these parameters are not used.
Figure 389: Input parameters for cellular receivers blocking masksAnchor F389 F389
...
Default values of standard desensitisation and Target I/N are specified in the table below.
Table 67: Default values of standard desensitisation and Target I/NAnchor T067 T067
| Standard Desensitization (dB) | Target I/N (dB) |
OFDMA UL | +6 | -6 |
OFDMA DL | +6 | -6 |
CDMA UL | +6 | -6 |
CDMA DL | +3 | -6 |
...