Content Comparison

Anchor
4.7.2 4.7.2

When you select the “None” mode (see ANNEX 13:), he can also define a Uniform density of terminal/transmitter by using the Uniform polar distance defined within the path distance factor and a uniform distributed path azimuth (0 to 360 deg).Uniform polar distance leads to uniformly distributed terminals in the circular area (area) and the Uniform distance leads to uniformly distributed terminals along the radius (line).

Then using a user-defined radius of 0.178 km and 1 interefering link transmitter (see Figure 130126), it is possible to reproduce the results of section 4.7.1. Therefore, the same results as those given in Figure 125 121 are found as shown in Figure 131127.

 Image Added

Anchor
F126

...

F126

Figure 130126: Uniform density using “None” mode

 Image Added

Anchor
F127

Image Removed

F127

Figure 131127: iRSS_unwanted / Uniform polar feature / 1 interefering interfering link transmitter and simulation radius of 0.178 km (same results as in Figure 125121)

Using a user-defined radius of 0.564 km and 10 interefering link transmitters, the same results as those given in Figure 128 124 are reached as shown in Figure 132128.

Anchor
F128 F128

Figure 132128: iRSS_unwanted / Uniform polar feature / 10 interefering interfering link transmitter
(same results as in Figure 125121)