When you select the “None” mode (see ANNEX 13:), he can also define a Uniform density of terminal/transmitter by using the Uniform polar distance defined within the path distance factor and a uniform distributed path azimuth (0 to 360 deg).Uniform polar distance leads to uniformly distributed terminals in the circular area (area) and the Uniform distance leads to uniformly distributed terminals along the radius (line).
Then using a user-defined radius of 0.178 km and 1 interefering link transmitter (see Figure 130), it is possible to reproduce the results of section 4.7.1. Therefore, the same results as those given in Figure 125 are found as shown in Figure 131.
Figure 130: Uniform density using “None” mode
Figure 131: iRSSunwanted / Uniform polar feature / 1 interefering link transmitter and simulation radius of 0.178 km (same results as in Figure 125)
Using a user-defined radius of 0.564 km and 10 interefering link transmitters, the same results as those given in Figure 128 are reached as shown in Figure 132.
Figure 132: iRSSunwanted / Uniform polar feature / 10 interefering link transmitter
(same results as in Figure 125)