In order for you to set up your workspace, you need to first set the system that you will be using as victim. You need to set the characteristics of your receiver (that will be the victim link receiver (VLR)) and the transmitter (that will be the victim link transmitter (VLT)).
You can edit the system characteristics directly in the system tab. This is illustrated in the figure below.
Figure 65 Access to the system environment
You can select a generic system from the “import system from library button” as shown Figure 67.
Figure 66: Import system from library button
Figure 67: Selecting a system from library
First, let set the frequency of the victim. You can change the frequency from 900 MHz (default value) to 1000 MHz as described in Figure 68. We consider a constant value for this example, but in principle, you can choose any type of distribution.
Figure 68: Example of setting up the operating frequency