You need now to set the victim link receiver by selecting the receiver tab.
Figure 69: Selecting the receiver tab
The parameters should be field according to the value of Table 6.
- The noise floor is –110 dBm. (#1 of Figure 70);
- The reception bandwidth is 200 kHz; (#2 of Figure 70);
- To simulate an omni-directional antenna, you can leave blank the horizontal pattern or you can select the omni directional antenna from the library (#3). The antenna peak gain is to be set to a value of 9 dBi; (#4) (see Figure 71);
- The antenna height is 30 m; (#5 of Figure 72);
- The interference criteria of the victim link receiver are a C/I of 19 dB, a C/(N+I) of 16 dB, a (N+I)/N criteria of 3 dB and a I/N of 0 dB; (#6 of Figure 73).
Figure 70 Setting the reception characteristic
Figure 71: Setting the antenna pattern from the library and setting the peak gain to 9 dBi
Figure 72: Setting the antenna height
Figure 73: Setting the interference criteria