To create or modify a library element containing parameters of a particular spectrum mask, select the Spectrum emission masks command from the Library pull-down menu or directly with CTRL+SHIFT+S.
A list of existing pre-defined spectrum emission mask (if you have not created any before) will be selectable as shown in the picture below. This is an example of a LTE UE (Table 6.6.3.1-2 of 3GPP TS 36.101) where the limit for the spurious emission domain (outside ± 12.5 MHz) applies to frequencies above 1000 MHz:
Figure 284: Spectrum emission mask library elements
When adding a new spectrum emission mask, you need to enter the name (unique identifier), description of its technical parameters.
Note 1: It is possible to quickly scroll up and down and see the differences in the masks.
Note 2: It is possible to create a mask from the workspace and export it to your library environment
Figure 285: Example on how to import/export to/from the workspace/library for
the spectrum emission mask