Once SEAMCAT has determined the number of UEs per cell either through simulation of optimal capacity (see Figure 200 for UL and Figure 201 for DL or by a value that you specify) the actual simulation of snapshots begins. As with all scenarios this causes SEAMCAT to show the scenario outline (Figure 245 for UL and Figure 246 for DL).
Figure 245: Example: CDMA Uplink as victim – Base-stations are shown as VLR
(several snapshots are displayed)
Figure 246: Example: CDMA Downlink as victim – Base-stations are shown as VLT (1 snapshot displayed here only)
Only CDMA base-stations will appear in the Scenario outline graph. Dependent on the scenario the base-stations positioning will appear as shown in Table 49.
Table 49: Role of the cellular element in the scenario outline
Scenario configuration | BS role | UE role | Positioning | Illustration |
CDMA Downlink is victim | Victim link transmitter | Victim link receiver | Reference cell is positioned in (0,0) |  |
CDMA Uplink is victim | Victim link receiver | Victim link transmitter | Reference cell is positioned in (0,0) |  |
CDMA Downlink is interferer | Interefering link transmitter | Interfering link receiver | Relative to victim and reference cell |  |
CDMA Uplink is interferer | Interfering link receiver | Interefering link transmitter | Relative to victim and reference cell |  |