/
A4.2 POWER CONTROL

A4.2 POWER CONTROL

Owned by Former user (Deleted)
Last updated: Aug 18, 2016

If the received signal can not exceed a given value, i.e. depending on the power control implemented in the victim system, the following applies dRSS = min(dRSScalc , sens+Pcmax x ). The power control implemented for the dRSS is described in ‎ANNEX 14:.

Related content

A14.2 RECEIVED POWER DYNAMIC RANGE IN THE VICTIM LINK
A14.2 RECEIVED POWER DYNAMIC RANGE IN THE VICTIM LINK
SEAMCAT Handbook
More like this
1.2.5 Wanted signal: dRSS
1.2.5 Wanted signal: dRSS
SEAMCAT Handbook
More like this
A4.1 DRSS CALCULATION
A4.1 DRSS CALCULATION
SEAMCAT Handbook
More like this
3.2.7 Calculating the dRSS by hand
3.2.7 Calculating the dRSS by hand
SEAMCAT Handbook
More like this
4.9 Power Control
4.9 Power Control
SEAMCAT Handbook
More like this
5.3.5 Emission characteristics
5.3.5 Emission characteristics
SEAMCAT Handbook
More like this