A16.2 DETERMINATION OF THE E.I.R.PMAX IN-BLOCK LIMIT

The following presents the results of the SEAMCAT logfile, when the E.I.R.Pmax in-block limit is to be determined. For this example the following E.I.R.P_max in-block limit is set in SEAMCAT

Figure 464: e.i.r.p._max in-block limit

The following log file is extracted and it shows the channel availability for one event and for one WSD (It no.1, WSD no. 0). In this case, this WSD would be allowed to transmit at 1000.1 and 1000.3 MHz, but it is not allowed to transmit in the 1000.5, 1000.7 and 1000.9 MHz. The Victim is placed at 1000.9 MHz.

Figure 465: Extract of the logfile

Figure 466: Illustration of the Selection process