9.10 OFDMA UL power control

In OFDMA UL, the power control is applied to the active users (i.e. the mobile users with specific RBs) so that the UE Tx power is adjusted with respect to the effective path loss (i.e. based on the MCL) to the BS it is connected to. In 3GPP ‎[12], the UL power control is defined so that the UE transmit power is set such as: 

 (Eq. 63)

where:

• Pt is the UE Tx power in dBm;
• P_max is the maximum transmit power in dBm;
• R_min is the minimum power reduction ratio to prevent UEs with good channels to transmit at very low power level. R_min is set by P_min / P_max.
• CL is the effective path loss in dB for the UE from its serving BS;
• CL_x-ile is the x-percentile effective path loss (plus shadowing) value. CL_x-ile is defined here as the value in the CDF, which is greater than the effective path loss of x percent of the MSs in the cell from the BS (i.e. it corresponds to the parameter “power Scale Threshold”. It is set by default to 0.9, but you can change it;
• γ is assumed to equal to 1 by default in SEAMCAT.

With this power control scheme, the 1-x percent of UEs that have a path-loss greater than CL_x-ile will transmit at P_max, i.e. are not power controlled. Annex ‎A15.6 provides further information about the implementation and the usage of the OFDMA UL power control.