A14.1 Power control in the interfering link
- Former user (Deleted)
A power control feature is implemented within SEAMCAT for the interfering link (see example in Section 4.9). When this feature is activated, this introduces a power control gain for the interefering link transmitter, defined as:
(Eq. 184)
where:
-
: power supplied to the ILT antenna (before power control); -
: ILT antenna gain in the direction of the ILR; -
: ILR antenna gain in the direction of the ILT; -
: path loss between the ILT and the ILR; -
: power control receiver threshold, if the received power is lower than this threshold, then no power control takes place (dBm); -
: power control dynamic range (dB); -
: steps of power control (dB).
The power received in the interfering link receiver results in:
(Eq. 185)
It distinguished between 3 cases:
Case 1 - (Received power below power threshold): 
Case (i+1) - (within power control limits):
where i is an integer ranging from 1 to 
Case (n_step +2) - (beyond power control limits):
